Skip to content

How to Charge a Ps3 Controller

To charge a PS3 controller, you will need to connect it to the console using a USB cable. Once connected, the controller will begin charging automatically. The amount of time it takes to fully charge a controller varies, but it is typically between two and four hours.

Sony DualShock 3 Charging Station Unboxing

  • Plug the controller into the PS3 using a USB cable
  • Press and hold the PS button on the controller for about 5 seconds, until the light on the controller starts flashing
  • The controller is now charging and will continue to flash while it charges
  • Once the controller is fully charged, the light will stop flashing and stay lit
How to Charge a Ps3 Controller


How Do I Charge My Ps3 Controller

Assuming you would like a step-by-step guide on how to charge your PS3 controller: 1. Plug the smaller end of your USB charging cable into the front of your PS3 controller. 2. Plug the larger end of your USB charging cable into an open USB port on your PS3 console.

Your controller will begin charging; the battery icon on the screen will show when it is finished. 3. Once charged, unplug your controller from the console and enjoy!

What is the Best Way to Charge My Ps3 Controller

There are a few different ways that you can charge your PS3 controller. The most popular way is to use the USB cable that came with your console. You can also use a Mini-USB cable, or even a Micro-USB cable if your controller supports it.

If you’re using a charging dock, make sure that the dock is compatible with your controller before plugging it in. The best way to charge your PS3 controller is to plug it into your console using the USB cable that came with your system. If you’re using a Mini-USB or Micro-USB cable, make sure that the voltage rating on the charger is 5 volts and that the current rating is 1 amp or higher.

If you’re not sure about these ratings, check with the manufacturer of your device before plugging it in.

How Long Does It Take to Charge a Ps3 Controller

It takes approximately two hours to charge a PS3 controller when it is completely depleted of power. The controller can be charged while the console is on or off, but it must be connected to the console via USB in order to charge. When the controller is first plugged in, the LED light will blink slowly to indicate that it is charging; when it is fully charged, the LED will stop blinking and remain lit.


If your PS3 controller isn’t working, the first thing you should do is check the batteries. If they’re dead, simply replace them with new ones. If that doesn’t work, it’s possible that your controller needs to be charged.

Here’s how to charge a PS3 controller: First, make sure your PS3 is turned off. Then, connect the controller to the console using the USB cable.

Next, press and hold the PS button on the controller for about 2 seconds. The light on the controller will start blinking, indicating that it’s charging. Once it’s done charging, the light will turn solid again.

That’s all there is to it! Just remember to disconnect the controller from the console once it’s done charging so you don’t drain the battery unnecessarily.

Leave a Reply

Your email address will not be published. Required fields are marked *