Skip to content

How to Make Nitro Cold Brew Keg

To make nitro cold brew keg, you’ll need: 1 pound of coarsely ground coffee, 8 cups of water, a whirley pop, a large mason jar, a small funnel, and a keg with nitrogen gas. 1. Combine the coffee and water in the mason jar. 2. Place the lid on the jar and screw on the whirley pop.

3. Cook over medium heat for 3-5 minutes, or until the mixture begins to boil. 4. Remove from heat and let cool slightly before opening the lid to release any pressure. 5. Pour the mixture into the funnel and then into the keg.

6. Connect the keg to an nitrogen gas tank and let sit for 24 hours before serving cold brew on tap!

How To Make Nitro Cold Brew Coffee

  • 1) In a large pitcher or cold brew keg, combine coffee grounds and water
  • 2) Stir to make sure all of the coffee grounds are fully saturated
  • 3) Let the mixture steep for 12-24 hours in the fridge
  • 4) After steeping, use a paper filter or cheesecloth to strain out the coffee grounds
  • 5) Pour your nitro cold brew into glasses and enjoy!

How to Make Cold Brew Keg

The popularity of cold brew coffee has surged in recent years, and for good reason. Cold brew is less acidic than hot-brewed coffee, and many people find it to be smoother and more flavorful. It’s also super easy to make at home with just a few simple ingredients.

Here’s what you’ll need to make cold brew keg: -Coffee beans (I like to use a dark roast) -A French press

-A large container or pitcher -Filtered water -Ice cubes (optional)

To start, grind your coffee beans using a coarse setting. You’ll want about twice as much coffee as you would use for hot brewing. For example, if you normally use two tablespoons of grounds for eight ounces of water, use four tablespoons for cold brew.

Next, add the grounds to your French press along with filtered room temperature water. Stir gently to combine, then put the lid on without pressing down the plunger. Allow the mixture to steep overnight, or for at least 12 hours.

After steeping, press down the plunger on the French press and pour the concentrate into a large container or pitcher. If you like your coffee on the weaker side, you can add some filtered water to dilute it at this point. Otherwise, feel free to enjoy it as is!

To serve, simply fill a glass with ice cubes (if desired) and pour in some concentrate. Add milk or cream if you like – I prefer my cold brew black – and enjoy!

Nitro Coffee Dispenser

A nitro coffee dispenser is a special type of coffee maker that injects nitrogen gas into the coffee as it’s being brewed, giving it a creamy, foamy texture. Nitro coffee has become popular in recent years for its smooth taste and unique appearance – the bubbles in the foam give it a “ draft beer”-like look. If you’re interested in trying out nitro coffee, you can now findnitro cold brew dispensers at many cafes and restaurants.

However, these machines can be quite expensive, so if you want to make nitro coffee at home, there are some ways to do it without breaking the bank. In this blog post, we’ll show you how to make your own nitro coffee using a few simple kitchen tools. What You Need to Make Nitro Coffee at Home:

Nitrogen gas (you can purchase small tanks of nitrogen gas at most welding supply stores) Coffee beans Coffee grinder

Cold brew coffee maker (or any other method for brewing concentrated cold brew coffee) directions: First, grind your coffee beans and brew a concentrate using your cold brew Coffee maker according to the manufacturer’s instructions. Once the concentrate is ready, pour it into a clean keg or growler.

Connect one end of a beverage-grade silicone tubing to the nitrogen gas tank and the other end to the keg or growler. Slowly open up the valve on the nitrogen tank and allow about 10 psi of pressure into your container – this will help push all of the oxygen out of solution and create those beautiful bubbles in your final product! once everything is pressurized, store your keg or growler in fridge until ready to serve. When you’re ready for a delicious cup of homemade nitro cold brew Coffee , simply pour over ice and enjoy!

How to Change a Nitro Cold Brew Keg

When you want to change a nitro cold brew keg, the process is pretty simple. Just follow these steps and you’ll be able to do it in no time! 1. First, make sure that you have all of the supplies that you need.

You’ll need a new keg of cold brew coffee, a gas line, and a nitrogen regulator. 2. Next, disconnect the old keg from the gas line and regulator. 3. Now, connect the new keg to the gas line and regulator.

Make sure that all of the connections are tight so that there are no leaks. 4. Finally, turn on the nitrogen and let it flow into the new keg until it is full. This will take about 10 minutes or so.

Once the new keg is full, you’re all set!

How to Make Nitro Cold Brew Reddit

If you’re a coffee lover, you’ve probably heard of cold brew coffee. If you haven’t, it’s basically coffee that’s been brewed with cold water instead of hot. This brewing method results in a less acidic, smoother cup of coffee.

Cold brew is also said to have more caffeine than regular coffee because the beans are steeped for a longer period of time. Nitro cold brew is cold brew coffee that’s been infused with nitrogen gas. It’s usually served on tap like beer and has a creamy, foamy head similar to Guinness.

The nitrogen gives the coffee a smooth, velvety texture and makes it slightly sweeter than regular cold brew. If you want to try making nitro cold brew at home, all you need is some good quality coffee beans, a Nitrocharge canister (available online or at some kitchen supply stores), and an keg or growler (or even just a large pitcher). Here’s how to do it:

1. Grind your beans and put them in the bottom of your keg or growler. Fill the container with cold water and stir gently until all the grounds are saturated. Cover and let sit for 12-24 hours.

2. After steeping, pour your cold brew concentrate through a filter into another container. This will get rid of any sediment from the beans as well as any rogue grounds that didn’t get filtered out during grinding.

Nitro Cold Brew Keg Delivery

Nitro cold brew is the latest coffee trend to hit the scene, and it’s not hard to see why. This delicious, creamy beverage has a unique taste and texture that is unlike any other coffee out there. And now, with nitro cold brew keg delivery, you can enjoy this amazing drink anytime, anywhere!

Nitro cold brew is made by infusing nitrogen gas into freshly brewed coffee. This gives the coffee a creamy, smooth texture and slightly sweet flavor. The final product is served on tap, just like beer or wine.

And because nitro cold brew is lower in acidity than regular coffee, it’s easier on your stomach too! Nitro cold brew keg delivery makes it easy to enjoy this delicious beverage whenever you want. Whether you’re hosting a party or just want to relax with a cup of coffee, nitro cold brew will be there when you need it.

Simply place your order online or over the phone and we’ll deliver your keg right to your door. It’s that easy! So what are you waiting for?

Order your nitro cold brew keg today and start enjoying this delicious new way to drink coffee!

Nitro Keg System

If you are a beer lover, then you have probably heard of nitro keg systems. These systems allow you to dispense beer from a pressurized nitrogen tank. Nitrogen is used instead of carbon dioxide because it does not dissolve in the liquid as easily.

This results in a smoother, creamier pint of beer. There are two types of nitro keg systems: direct draw and remote. Direct draw systems are less expensive and easier to set up than remote systems.

With a direct draw system, the nitrogen tank is located next to the keg. The pressure from the tank is regulated by a valve on the side of the fridge or cooler that the keg is stored in. Remote systems are more expensive but they offer more flexibility in terms of where you can store your nitrogen tanks and how many taps you can have.

No matter which type of system you choose, there are a few things you need to know in order to get started. First, make sure that your fridge or cooler can accommodate a pressurized nitrogen tank. You will also need to purchase some special fittings and hoses in order to connect everything together.

Finally, be sure to read all instructions carefully before attempting to use your new system!

Commercial Nitro Cold Brew Machine

If you are in the market for a commercial nitro cold brew machine, there are a few things you should keep in mind. First, what is your budget? These machines can range in price from a few hundred dollars to several thousand dollars.

Second, what is the intended use for the machine? Will it be used in a coffee shop or restaurant, or will it be used for home brewing? Third, how much space do you have to work with?

Some of these machines are quite large and require a significant amount of counter space. Fourth, how many drinks will you be serving per day? If you plan on serving a lot of nitro cold brews, you will need a machine that can accommodate that demand.

Lastly, take into consideration any special features that might be important to you such as automatic frothing or self-cleaning. With all of these factors in mind, let’s take a look at some of the best commercial nitro cold brew machines on the market: The NitroBrew Commercial Cold Brew Coffee Machine is one of the most popular options on the market.

It is made from high quality stainless steel and has an automated frothing system. This machine also has a self-cleaning feature which makes it very easy to maintain. It can accommodate up to 64 ounces of coffee concentrate and can make up to 32 cups per batch.

The price tag on this machine is around $3200. Another option is the Kegco Nitro Cold Brew Coffee Maker Kegerator Conversion Kit. This kit includes everything you need to convert your standard kegerator into a nitro cold brew machine.

It includes a draft arm with faucet and coupler, nitrogen regulator, black vinyl tubing, and instructions. This kit does not include an actual cold brew coffee maker so you will need to purchase one separately (we recommend the Oxo Good Grips Cold Brew Coffee Maker). The Kegco kit costs around $250 while the Oxo Good Grips costs around $50-$100 depending on where you purchase it from (Amazon typically has the best prices). If you are looking for something more affordable but still want all of the features mentioned above (automatic frothing & self-cleaning), we recommend checking out The Breville BCM600SILUS Milk Cafe Frother & Steamer . This compact little appliance does everything!

Nitro Cold Brew Kegerator Kit

Looking for a way to make your cold brew even colder? Check out our Nitro Cold Brew Kegerator Kit! This kit includes everything you need to get started, including a keg, carbonating gas, and tap.

With this system, you can serve up frosty cold brew on tap, anytime you want.

How to Make Nitro Cold Brew Keg


How Long Does Nitro Cold Brew Last in a Keg?

Assuming you are referring to how long a keg of nitro cold brew coffee will last: Nitro cold brew coffee from a keg can last up to 2 weeks, assuming it is stored in a cool, dark place. After 2 weeks, the coffee will start to lose its flavor and become more acidic.

Is Nitro Cold Brew in a Keg?

There are many ways to make cold brew coffee, but one of the most popular methods is using a keg. Nitro cold brew coffee is made by infusing nitrogen gas into cold brew coffee, which gives it a creamy texture and rich flavor. Nitro cold brew coffee in a keg is a great way to serve this delicious beverage to large groups of people.

If you’re looking for a unique and exciting way to serve coffee at your next event, consider nitro cold brew from a keg!

How Do You Change a Nitro Cold Brew Keg at Starbucks?

To change a nitro cold brew keg at Starbucks, follow these steps: 1. Check that the area around the keg is clean and free of debris. 2. Place a new empty keg on the floor next to the full one.

3. Using a wrench, loosen the gas inlet valve on the full keg (do not remove). 4. Quickly open the valve on the new empty keg. Doing this too slowly will result in flat nitro coffee.

5. Fill the new keg with cold brew concentrate using a funnel. Be sure to leave some headspace (around an inch) at the top of the keg. 6 Close both valves on both kegs, then release any pressure that may have built up in either one by gently pressing down on their respective relief valves until you hear hissing stop.

You can now disconnect them from each other. 7 Connect gas lines to their correct valves – make sure they’re tight! – and turn on nitrogen (or carbon dioxide, depending on which you’re using).

Nitrogen should be set at about 60 PSI; CO2 should be set lower, around 30 PSI for cold brew coffee (higher for other types of draft beverages like beer). 8 Once pressurized, shake/agitate your new nitro cold brew coffee keg until it’s completely mixed and has reached desired level of creamy smoothness (this could take anywhere from 5-15 minutes). 9 Now all that’s left is to tap it and serve!

Can You Use Co2 for Nitro Cold Brew?

Yes, you can use CO2 for nitro cold brew. Nitro cold brew is coffee that has been infused with nitrogen gas, which gives it a creamy, foamy texture and a slightly sweet taste. The nitrogen also makes the coffee less acidic, so it’s easier on your stomach.

CO2 is often used to infuse nitrogen into liquids like beer and soda. It’s also used in food preparation, like whipped cream or carbonated beverages. When CO2 is pressurized, it turns into a liquid.

This liquid is then injected into the coffee using a special tap. The pressure from the CO2 forces the nitrogen gas into the coffee, where it dissolves and creates bubbles. These bubbles give the coffee its signature creamy texture and sweet taste.

Nitrogenated cold brew usually has about 70% more caffeine than regular cold brew coffee because of the way it’s brewed. If you’re looking for a smoother, sweeter cup of coffee, try nitro cold brew with CO2 today!


Making cold brew coffee with a nitro tap is easy and will impress your friends! Just follow these simple steps: 1. Fill a keg with cold brew concentrate.

You can make your own or buy it from a coffee shop. 2. Connect the keg to the nitrogen tank and set the pressure to 30-40 psi. 3. Let the nitrogen mix with the coffee for 24 hours, then serve straight from the tap!

Leave a Reply

Your email address will not be published. Required fields are marked *