Skip to content

How to Reset Gamecube Controller

There are a few different ways that you can reset your Gamecube controller. One way is to hold down the A Button, B Button, X Button, and Y Button all at the same time for about 15 seconds. This will cause the controller to reset and all four lights on the front of the controller will blink.

Another way to reset your Gamecube controller is to take out the batteries for about 30 seconds and then put them back in. This should also cause the controller to reset.

  • Unplug the controller from the console
  • Press and hold the A button, B button, X button, and Y button simultaneously while also pressing down on the left stick
  • While continuing to hold those buttons, plug the controller back into the console
  • The LED lights on the controller should begin flashing indicating that it’s in syncing mode
  • Press any button on the controller to complete the reset process and establish a connection with the console

GameCube Controller Drift Fix Guide (Potentiometer Reset) REUPLOAD

How Do I Reset My Gamecube Controller

It’s pretty easy to reset a Gamecube controller – all you need is a paperclip! Just follow these simple steps: 1. Locate the small hole on the back of the controller, near where the L and R buttons are.

2. Insert the paperclip into this hole and press down firmly. 3. Hold down the paperclip for around 5 seconds, or until you hear a click. This indicates that the controller has been reset.

4. You can now remove the paperclip and use your controller as normal!

How Do I Connect My Gamecube Controller to the Wii

Assuming you would like a step-by-step guide on how to connect a Gamecube controller to the Wii: 1. Start with the power off on both the Wii console and the TV. 2. Insert the Gamecube controller adapter into one of the Wii’s USB ports, located in front of the console.

3. Plug in up to four Gamecube controllers into the corresponding ports on the adapter, making sure that Player One’s controller is plugged into Port One. If you only have one controller, any port will do. 4. Turn on your TV and Wii console.

The red lights on the adapter and controllers should light up indicating they are powered on and working properly. If not, check your connections and try again. 5a.

If using an HDMI cable, select ‘Wii Menu’ from…

How Do I Charge My Gamecube Controller

There are a few different ways that you can charge your Gamecube controller. The most common way is to use the official Nintendo brand charger. This will plug into the wall and then has a cord that plugs into the controller itself.

You can also find third-party chargers that work in a similar way. Some people also like to use AA batteries in their controllers, which can be charged using a standard AA battery charger. Finally, some newer models of the Gamecube controller have a built-in rechargeable battery pack, which can be charged by plugging the controller into the console itself.

How to Reset Gamecube Controller



Resetting a Gamecube controller is a pretty simple process. First, find the tiny hole on the back of the controller near the L button. Next, use a paperclip or something similar to push and hold the reset button inside the hole for about three seconds.

Finally, release the reset button and your controller should be good as new!

Leave a Reply

Your email address will not be published. Required fields are marked *